MS6891 Datasheet | MOSA

FEATURES - Operation range: 2.5V ~ 6.5V - Shutdown Current 0.1u A at 5V - PSRR at 217Hz, 70d B at 5V - Output power THD+N=10% RL=8Ω, 2.1W at 6V, 1.5W at 5V, 0.65W at 3.3V, 0.35W at 2.5V, THD+N=1% RL=8Ω, 1.75W at 6V ,1.2W at 5V, 0.5W at 3.3V, 0.25W at 2.5V THD+N = 0.2% RL=8Ω, 1.25W at 6V ,0.8W at 5V, 0.4W at 3.3V, 0.2W at 2.5V - Unity-gain stable - Space-saving SOP(TP) APPLICATIONS - Portable electronic devices - PDAs - munication headsets Cross-reference LM4891 DESCRIPTION The MS6891 is a low distortion power amplifier that can drive 1.5W of continuous average power into a mono 8Ω bridged-tied load (BTL). Operation with 2.5V supply, it can drive 200mw into a mono 8Ω. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications. The MS6891 is unity-gain stable and can be configured by external gain-setting resistors. The MS6891 has good feature for portable equipment, these features include the low voltage operation, micropower consumption shutdown mode, enhance thermal pad small package SOP8(TP), make the MS6891 ideally suited for use in portable electronic equipments. - TP : Thermal Pad BLOCK DIAGRAM REV 3 1/9 .mosanalog. MOSA Mono 1.5W Power Amplifier with Shutdown PIN CONFIGURATION Symbol SHDN +IN -IN Vo1 VDD GND Vo2 Pin Description Shutdown places the entire device in shutdown mode when held High. TTL patible input. Bypass is the cap to the voltage divider for internal mid-supply bias. This terminal should be connected to a 0.1-μF to 10-μF capacitor CBP. 3 Non-inverting input 4 Inverting input 5 BTL negative output 6 Supply voltage 7 Ground 8 BTL positive output SOP8(TP)...