SRF1070
SRF1070 is Dual Schottky Barrier Power Rectifiers manufactured by Mospec Semiconductor.
MOSPEC
Switchmode Full Plastic Dual Schottky Barrier Power Rectifiers
Using the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.
Features
- Low Forward Voltage.
- Low Switching noise.
- High Current Capacity
- Guarantee Reverse Avalanche.
- Guard-Ring for Stress Protection.
- Low Power Loss & High efficiency.
- 125 Operating Junction Temperature
- Low Stored Charge Majority Carrier Conduction.
- Plastic Material used Carries Underwriters Laboratory
Mecnanical Data Case :JEDEC ITO-220AB molded plastic body Termals:Plated lead,solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Torqure: 4-6kg.cm Weight:1.7 g approx.
Plating pb free is indicated by box
SRF1070 Thru SRF10100
SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 70-100 VOLTS
ITO-220AB
MAXIMUM RATINGS
Characteristic
Symbol
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current Total Device (Rated VR),TC=100
Peak Repetitive Forward Current (Rate VR, Square Wave, 20k Hz)
Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz)
Operating and Storage Junction Temperature Range
VRRM VRWM
VR VR(RMS)
IF(AV) IFM...
