Datasheet4U Logo Datasheet4U.com

HFC0310 - Programmable Fixed-Frequency Flyback Controller

General Description

The HFC0310 is a flyback controller with programmable fixed-frequency operation.

The controller uses peak current mode to provide excellent transient response and ease loop compensation.

Key Features

  • Programmable switching frequency up to 600kHz.
  • Frequency shaping.
  • Current-mode operation.
  • Very low start-up current.
  • Very low standby power consumption via active-burst mode.
  • Internal leading-edge blanking.
  • Built-in soft-start function.
  • Internal slope compensation.
  • External protection with recovery hysteresis on PRO pin.
  • Over-temperature protection.
  • VCC under-voltage lockout with hysteresis.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HFC0310 Programmable Fixed-Frequency Flyback Controller DESCRIPTION The HFC0310 is a flyback controller with programmable fixed-frequency operation. The controller uses peak current mode to provide excellent transient response and ease loop compensation. When the output power falls below a given level, the controller enters burst mode to lower the stand-by power consumption. An external capacitor connected between the FSET pin and GND programs the HFC0310 switching frequency. Otherwise, the HFC0310 uses a frequency shaping function that greatly reduces the noise level, and reduces the cost of the EMI filter. The HFC0310 provides various protections, such as thermal shutdown, VCC under-voltage lockout, over-load protection, over-voltage protection, and short-circuit protection.