Datasheet4U Logo Datasheet4U.com

MA800 - 8-Bit Contactless Angle Encoder

General Description

The MA800 is an easy-to-use, magnetic, angle encoder with a digital output designed to replace analogic potentiometers or rotary switches.

The MA800 is designed for slow operation such as human-machine interface, manual controls, etc.

where the rotating speed remains below 200 rpm.

Key Features

  • programmable magnetic field strength thresholds, which allow for the implementation of a push or pull button function. These are output as two logic signals. On-chip non-volatile memory provides storage for the configuration parameters, including the reference zero angle position and magnetic field detection threshold settings.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MA8000 Standby Low-Power Consumption Power Supply IC Module ETC
MA801 8051 - SCM Megawin
MA80101 High Frequency Ceramic Capacitors Murata Electronics
MA802 8051 - SCM Megawin
MA8024 Silicon planar type Panasonic

Other Datasheets by Monolithic Power Systems

Part Number Description
MA850 8-Bit Contactless Angle Encoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MagAlpha MA800 8-Bit Contactless Angle Encoder with Push Button Function DESCRIPTION The MA800 is an easy-to-use, magnetic, angle encoder with a digital output designed to replace analogic potentiometers or rotary switches. The MA800 is designed for slow operation such as human-machine interface, manual controls, etc. where the rotating speed remains below 200 rpm. The sensor detects the absolute angular position of a permanent magnet attached to a rotating shaft. The magnet shapes and configurations are very flexible. Typically, the MA800 is used with a diametrically magnetized cylinder of 2 - 8mm in diameter. The MA800 features programmable magnetic field strength thresholds, which allow for the implementation of a push or pull button function. These are output as two logic signals.