Datasheet4U Logo Datasheet4U.com

MP1519DQ Datasheet High Efficiency Charge Pump 4 White Led Driver

Manufacturer: Monolithic Power Systems

Overview: TM MP1519 1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver The Future of Analog IC Technology.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells.

The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor.

The driver allows PWM operation to support brightness control.

Key Features

  • 2% LED Current Matching.
  • High Efficiency (>93%).
  • Current Source Outputs.
  • No Ballast Resistors Required.
  • 1x, 1.5x and 2x Automatic Modes.
  • Constant Frequency Operation.
  • Automatic LED Detection.
  • High and Low Frequency PWM Capability.
  • 2.5V to 5.5V Operation.
  • Less than 1μA Leakage during Shutdown.
  • Detects Changes in Battery Level.
  • No External Schottky Diode Required.
  • Soft-Start and So.

More Datasheets from Monolithic Power Systems

Part Number Description
MP1519 High Efficiency Charge Pump 4 White LED Driver
MP150 Offline Primary-Side Regulator
MP150GJ Offline Primary-Side Regulator
MP150GS Offline Primary-Side Regulator
MP1530 Triple Output Step-Up Plus Linear Regulators
MP1530DM Triple Output Step-Up Plus Linear Regulators
MP1530DQ Triple Output Step-Up Plus Linear Regulators
MP1531 Triple Output Step-Up Plus Charge Pump
MP1541 1.3MHz Boost Converter
MP1541DJ 1.3MHz Boost Converter

MP1519DQ Distributor