Datasheet4U Logo Datasheet4U.com

MP1583DP - 385KHz Step-Down Converter

Download the MP1583DP datasheet PDF. This datasheet also covers the MP1583 variant, as both devices belong to the same 385khz step-down converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP1583 is a step-down regulator with a built-in internal Power MOSFET.

It achieves 3A of continuous output current over a wide input supply range with excellent load and line regulation.

Current mode operation provides fast transient response and eases loop stabilization.

Key Features

  • 3A Output Current.
  • Programmable Soft-Start.
  • 100mΩ Internal Power MOSFET Switch.
  • Stable with Low ESR Output Ceramic Capacitors.
  • Up to 95% Efficiency.
  • 20μA Shutdown Mode.
  • Fixed 385KHz Frequency.
  • Thermal Shutdown.
  • Cycle-by-Cycle Over Current Protection.
  • Wide 4.75V to 23V Operating Input Range.
  • Output Adjustable from 1.22V to 21V.
  • Under-Voltage Lockout.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP1583-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP158 SILICON BRIDGE RECTIFIER Rectron Semiconductor
MP158 Single Phase Bridge Rectifier Micro Commercial Components
MP158W SILICON BRIDGE RECTIFIER Rectron
MP150 Low Cost Quartz Crystal CTS
MP150-E Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP1583DN 385KHz Step-Down Converter
MP1583 385KHz Step-Down Converter
MP158 Off-line Regulator
MP1584 Step-Down Converter
MP1584EN Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP1583 is a step-down regulator with a built-in internal Power MOSFET. It achieves 3A of continuous output current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown. An adjustable soft-start reduces the stress on the input source at startup. In shutdown mode the regulator draws 20μA of supply current. The MP1583 requires a minimum number of external components, providing a compact solution.