Monolithic Power Systems MP1906DS
The MP1906 is a high-performance, 80V, gate driver that can drive two external N-MOSFETs in a half-bridge configuration with a 12V gate supply. It accepts independent gate input signals and provides shoot-through prevention. The high-current driving capability and short dead time make it suitable for high-power and highefficiency power applications, such as telecom DC-DC converters.| Part No. | MP1906DS |
|---|---|
| Datasheet | MP1906DS Download |
| Manufacturer |  Monolithic Power Systems |
| Description | 80V Half-Bridge Gate Driver |
| Buy | Stock & Price |
DESCRIPTION
During under-voltage lockout, the output of the high- and low-side drivers goes low to prevent erratic operation under low supply conditions. The compact 8-pin SOIC package minimizes the component count and the board space. MP1906 80V, Half-Bridge, Gate DriverFEATURES
● Drives Two Low-Cost, High-Efficiency NMOSFETs● 10V-16V Gate Drive Supply
● 3.3V, 5V Logic Compatibility
● 80ns Propagation Delay
● Less than 90μA Quiescent Current
● Under-Voltage Lockout for Both Channels
● Input-Signal-Overlap Protection
● Internal 150ns Dead Time
● Available in a Compact 8-pin SOIC Package
APPLICATIONS
● Motor Drivers● Half-Bridge Power Supplies
● Avionics DC-DC Converters
● Active-Clamp Forward Converters All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION VIN=12V CONTROLLER VCC BT HPWM TG LPWM SW GND BG Up to 80V To Output Load MP1906 Rev.
