Datasheet4U Logo Datasheet4U.com

MP1907GQ - High Frequency Half-bridge Gate Driver

Download the MP1907GQ datasheet PDF. This datasheet also covers the MP1907 variant, as both devices belong to the same high frequency half-bridge gate driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP1907 is a high frequency, 100V half bridge N-channel power MOSFET driver.

Its low side and high side driver channels are independently controlled and matched with less than 5ns in time delay.

Key Features

  • Drives N-channel MOSFET half bridge.
  • 100V VBST voltage range.
  • Input signal overlap protection.
  • On-chip bootstrap diode.
  • Typical 20ns propagation delay time.
  • Less than 5ns gate drive mismatch.
  • Drive 1nF load with 12ns/9ns rise/fall times with 12V VDD.
  • TTL compatible input.
  • Less than 150μA quiescent current.
  • Less than 5μA shutdown current.
  • UVLO for both high side and low side.
  • In 3×3mm QFN1.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP1907-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP196 Low Cost Quartz Crystal CTS
MP196-E Low Cost Quartz Crystal CTS
MP196A Low Cost Quartz Crystal CTS
MP196A-E Low Cost Quartz Crystal CTS
MP196B Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP1907 High Frequency Half-bridge Gate Driver
MP1909 2A Half-Bridge Gate Driver
MP1909GTL 2A Half-Bridge Gate Driver
MP1917A High-Frequency Half-Bridge Gate Driver
MP1921A High Frequency Half-Bridge Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP1907 is a high frequency, 100V half bridge N-channel power MOSFET driver. Its low side and high side driver channels are independently controlled and matched with less than 5ns in time delay. Under-voltage lock-out both high side and low side supplies force their outputs low in case of insufficient supply. Both outputs will remain low until a rising edge on either input is detected. The integrated bootstrap diode reduces external component count. TYPICAL APPLICATION 3.3V BATT MP1907 100V, 2.