Datasheet4U Logo Datasheet4U.com

MP2009EE - 120mA Linear Regulator

This page provides the datasheet information for the MP2009EE, a member of the MP2009 120mA Linear Regulator family.

Description

The MP2009 is an ultra low noise, low dropout linear regulator.

The output voltage of MP2009 ranges from 1.5V to 4.5V in 100mV increments and 1% accuracy by operating from a +2.0V to +6.0V input.

It is designed to deliver up to 120mA continuous output current.

Features

  • Space-Saving SC70 Package.
  • 16µVRMS Output Noise (100Hz to 30kHz) No Bypass Capacitor Required.
  • 78dB PSRR at 1kHz.
  • 120mV Dropout at 120mA Load.
  • Stable with 1µF Ceramic Capacitor for Any Load.
  • Low 50µA Ground Current.
  • Very Fast Line and Load Transient Response with Small Input and Output Capacitor.
  • Current Limit and Thermal Protection.

📥 Download Datasheet

Datasheet preview – MP2009EE

📁 Similar Datasheet

  • MP200 - Low Cost Quartz Crystal (CTS)
  • MP200-E - Low Cost Quartz Crystal (CTS)
  • MP200701 - Magnetic Proximity Sensors (Cherry)
  • MP200702 - Magnetic Proximity Sensors (Cherry)
  • MP200703 - Magnetic Proximity Sensors (Cherry)
  • MP200A - Low Cost Quartz Crystal (CTS)
  • MP200A-E - Low Cost Quartz Crystal (CTS)
  • MP200B - Low Cost Quartz Crystal (CTS)
  • MP200B-E - Low Cost Quartz Crystal (CTS)
  • MP201701 - MAGNETIC SENSOR (Cherry)
Other Datasheets by MPS
  • MP2009 - 120mA Linear Regulator
  • MP2002 - Low Input Voltage 500mA Linear Regulator
  • MP2002A - 500mA Linear Regulator
  • MP2002AGD - 500mA Linear Regulator
  • MP2002DD - Low Input Voltage 500mA Linear Regulator
  • MP20043 - 300mA Linear Regulator
  • MP20045 - 1A Linear Regulator
  • MP20045DN - 1A Linear Regulator

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology MP2009 Ultra-Low-Noise Low-Dropout, 120mA Linear Regulator DESCRIPTION The MP2009 is an ultra low noise, low dropout linear regulator. The output voltage of MP2009 ranges from 1.5V to 4.5V in 100mV increments and 1% accuracy by operating from a +2.0V to +6.0V input. It is designed to deliver up to 120mA continuous output current. It achieves a low 120mV dropout for full load current. The MP2009 uses an internal PMOS as the pass element, which consumes 50µA supply current at no load condition. New innovative design techniques make MP2009 achieve ultralow output voltage noise of 16µVRMS without a noise bypass capacitor.
Published: |