MP2107DQ Datasheet | Monolithic Power Systems

DESCRIPTION The MP2107 is an internally pensated 1.5MHz fixed-frequency PWM synchronous step-down regulator. MP2107 operates from a 2.7V to 6V input and generates an output voltage as low as 0.8V. The MP2107 integrates a 80mΩ high-side switch and a 60mΩ synchronous rectifier for high efficiency without an external Schottky diode. With peak current mode control and internal pensation, the MP2107 based solution delivers a very pact footprint with a minimum ponent count. The MP2107 is available in a small 3mm x 3mm 10-pin QFN package and the MP2107A is available in an 8-pin SOIC package with an exposed pad. TYPICAL APPLICATION VIN 5V POK (MP2107) OFF ON IN POK BS SW EN/SYNC C3 100n F MP2107/MP2107A 4A, 6V Synchronous Step-Down Switching Regulator FEATURES - 4A Output Current - Input Operation Range: 2.7V to 6V - 60mΩ Internal Power MOSFET Switches - All Ceramic Capacitor Design - Up to 95% Efficiency - 1.5MHz Fixed Switching Frequency - Adjustable Output from 0.8V to 0.9x VIN - Internal Soft-Start - Frequency Synchronization Input - Power Good Output - Cycle-by-Cycle Current Limiting - Hiccup Short Circuit Protection - Thermal Shutdown - 3mm x 3mm 10-pin QFN (MP2107) and 8-pin SOIC (MP2107A) Packages APPLICATIONS - µP/ASIC/DSP/FPGA Core and I/O Supplies - Printers and LCD TVs - Network and Tele Equipment - Point of Load Regulators “MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic Power Systems, Inc. VOUT 1.8V / 4A EFFICIENCY (%) Efficiency vs Output...