MP2130DG Datasheet PDF (1.2MHz Synchronous Step-Down Converter)

MP2130DG - 1.2MHz Synchronous Step-Down Converter

This page provides the datasheet information for the MP2130DG, a member of the MP2130 1.2MHz Synchronous Step-Down Converter family.

Description

MOSFETs.

excellent load and line regulation.

Features

Above 95% Peak Efficiency.
Above 80% Light Load Efficiency.
Wide 2.7V to 6V Operating Input Range.
Output Voltage as Low as 0.6V.
100% Duty Cycle in Dropout.
3.5A Output Current.
50mΩ and 40mΩ Internal Power MOSFET.
1.2MHz Frequency.
EN and Power Good for Power Sequencing.
Cycle-by-Cycle Over Current Protection.
Auto Discharge at Power-off.
Short Circuit Protection with Hiccup Mode.
Thermal Shutdown.
Stable with Low ESR Outp.

Datasheet Details

Part number	MP2130DG
Manufacturer	Monolithic Power Systems (MPS)
File Size	802.90 KB
Description	1.2MHz Synchronous Step-Down Converter
Datasheet	MP2130DG Datasheet
Additional preview pages of the MP2130DG datasheet.

📁 Similar Datasheet

MP2103K3C10 - Safety Standard Capacitor (ETC)

MP2104K3C30 - Safety Standard Capacitor (ETC)

MP2104K3D20 - Safety Standard Capacitor (ETC)

MP2105K3E60 - Safety Standard Capacitor (ETC)

MP2105K3F20 - Safety Standard Capacitor (ETC)

MP2123K3C10 - Safety Standard Capacitor (ETC)

MP2124K3D20 - Safety Standard Capacitor (ETC)

MP2125K3F30 - Safety Standard Capacitor (ETC)

MP2125K3TB0 - Safety Standard Capacitor (ETC)

MP2153K3C10 - Safety Standard Capacitor (ETC)

Full PDF Text Transcription

Click to expand full text

MP2130 High Efficiency, 3.5A, 6V, 1.2MHz Synchronous Step-Down Converter in an The Future of Analog IC Technology Ultra–Small QFN12 (2x2mm) Package R DESCRIPTION The MP2130 is a monolithic step-down switch O mode converter with built-in internal power MOSFETs. It achieves 3.5A continuous output F current from a 2.7V to 6V input voltage with excellent load and line regulation. The MP2130 is ideal for powering portable equipment that runs D from a single cell Lithium-Ion (Li+) Battery. The output voltage can be regulated as low as 0.6V. E The Constant-On-time (COT) control scheme provides fast transient response high light-load D efficiency and easy loop stabilization. N S 4 Fault condition protection includes cycle-by-cycle current limit and thermal shutdown.

Published: Dec 8, 2024 |