Monolithic Power Systems MP2307
The MP2307 is a monolithic synchronous buck regulator. The device integrates 100mΩ MOSFETS that provide 3A of continuous load current over a wide operating input voltage of 4.75V to 23V. This device, available in an 8-pin SOIC package, provides a very compact system solution with minimal reliance on external components.| Part No. | MP2307 |
|---|---|
| Datasheet | MP2307 Download |
| Manufacturer |  Monolithic Power Systems |
| Description | 3A 23V 340KHz Synchronous Rectified Step-Down Converter |
| Buy | Stock & Price |
DESCRIPTION
Current mode control provides fast transient response and cycle-by-cycle current limit. An adjustable soft-start prevents inrush current at turn-on and in shutdown mode, the supply current drops below 1µA. EVALUATION BOARD REFERENCE Board Number EV2307DN-00A Dimensions 2.0”X x 1.5”Y x 0.5”ZFEATURES
● 3A Continuous Output Current 4A Peak Output Current● Wide 4.75V to 23V Operating Input Range
● Integrated 100mΩ Power MOSFET Switches
● Output Adjustable from 0.925V to 20V
● Up to 95% Efficiency
● Programmable Soft-Start
● Stable with Low ESR Ceramic Output Capacitors
● Fixed 340KHz Frequency
● Cycle-by-Cycle Over Current Protection
● Input Under Voltage Lockout
● Thermally Enhanced 8-Pin SOIC Package
APPLICATIONS
● Distributed Power Systems● Networking Systems
● FPGA, DSP, ASIC Power Supplies
● Green Electronics/Appliances
● Notebook Computers “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION INPU...
