Monolithic Power Systems MP2341GTL
The MP2341 is a 24V, monolithic, synchronous, rectified, step-down, switch-mode white LED driver with built-in internal power MOSFETs and a synchronous rectifier switch. The MP2341 achieves up to 2A of continuous output current with excellent load and line regulation. The MP2341 requires a minimal number of readily available, standard external components, and is available in a space-saving SOT583 package.MP2341GTL Specifications
- Min Voltage : 4.2V
- Max Voltage : 24V
- Terminals : 8
- Circuits : 1
- Max Operating Temp : 125°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | MP2341GTL |
|---|---|
| Datasheet | MP2341GTL Download |
| Manufacturer |  Monolithic Power Systems |
| Description | Step-Down LED Driver |
| Buy | Stock & Price |
DESCRIPTION
Peak current mode control operation provides fast transient response, easy loop design, and tight output regulation. Fault condition protection includes cycle-bycycle peak current limiting, output short circuit protection, open LED protection, and thermal shutdown. MP2341 High-Efficiency, 2A, 24V, 1MHz, Synchronous, Step-Down LED Driver in SOT583 PackageFEATURES
● Wide 4.2V to 24V Operating Input Range● 125mΩ/75mΩ Low-RDS(ON) Internal Power MOSFETs
● High-Efficiency Synchronous Mode Operation
● Forced PWM Mode
● Fast Load Transient Response
● 1MHz Switching Frequency
● Internal Soft Start (SS)
● Analog Dimming by the DC Voltage through the EN/DIM Pin
● Analog Dimming by the PWM Signal through the PDIM Pin
● PWM Dimming by the PWM Signal through the EN/DIM Pin
● 50:1 Dimming Ratio via Analog Dimming
● 1000:1 Dimming Ratio via PWM Dimming
● Open LED Protection
● Over-Current Protection (OCP) and Hiccup Mode
● Over-Voltage Protection (OVP) with Auto- Recovery
● Thermal Shutd...
