Datasheet4U Logo Datasheet4U.com

MP2724 - 2.2A Buck Charger

General Description

The MP2724 is a highly integrated, 2.2A, switch-mode battery management device for single-cell Li-ion or Li-polymer batteries.

Key Features

  • 2.2A Switching Charger with NVDC Power Path Management.
  • Integrated CC Controller for USB Type-C Sink Mode.
  • Supports USB BC1.2 and Non-Standard Adapters.
  • 26V Sustainable Input Voltage (VIN).
  • Configurable 40mA to 2.2A Charge Current (ICC) and 100mA to 3.2A Input Current Limit (IIN_LIM) via the I2C.
  • Minimum VIN Loop for Maximum Adapter Power Tracking.
  • Comprehensive Safety Features: o Fully Customizable JEITA Profile o Additional Negati.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP270 Low Cost Quartz Crystal CTS
MP270-E Low Cost Quartz Crystal CTS
MP270B Low Cost Quartz Crystal CTS
MP270B-E Low Cost Quartz Crystal CTS
MP2-202S Fast Recovery Diode Sanken

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2720A Buck Charger
MP2720AGRH Buck Charger
MP2721 I2C-Controlled NVDC Buck Charger
MP2722 NVDC Buck Charger
MP2723A 3A I2C-Controlled SW Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP2724 2.2A, Single-Cell, I2C-Controlled Buck Charger with USB Type-C Sink Mode and 15mA Termination Current DESCRIPTION The MP2724 is a highly integrated, 2.2A, switch-mode battery management device for single-cell Li-ion or Li-polymer batteries. The narrow-voltage DC (NVDC) power management structure provides a low-impedance power path that optimizes charging efficiency, reduces battery charging time, and extends battery life during discharging. The MP2724 supports USB Type-C sink mode to detect the current capability of a USB Type-C adapter. Its input source type identification algorithm also supports USB Battery Charging Specification 1.2 (BC1.2) and non-standard adapter detection.