Datasheet4U Logo Datasheet4U.com

MP2980 - Synchronous Buck-Boost Controller

Description

The MP2980 is a synchronous, four-switch, buck-boost controller capable of regulating different output voltages with a wide input voltage (VIN) range and high efficiency.

Features

  • 6V to 36V Start-Up Input Voltage (VIN) Range.
  • 5V to 36V Operating VIN Range.
  • Flexible Digital Interface Control: o 0.5V to 28V Output Voltage (VOUT) Range o 0.3V to 2.047V Reference Voltage (VREF) Range with 1mV Step.
  • Selectable VOUT Slew Rate.
  • Configurable Constant Current Limit.
  • Output Current (IOUT) Monitor Function (IMON).
  • Configurable Soft-Start Time (tSS).
  • Switching Frequency Spread Spectrum (FSS) for EMI Optimization.

📥 Download Datasheet

Datasheet preview – MP2980

📁 Similar Datasheet

  • MP2-202S - Fast Recovery Diode (Sanken)
  • MP200 - Low Cost Quartz Crystal (CTS)
  • MP200-E - Low Cost Quartz Crystal (CTS)
  • MP200701 - Magnetic Proximity Sensors (Cherry)
  • MP200702 - Magnetic Proximity Sensors (Cherry)
  • MP200703 - Magnetic Proximity Sensors (Cherry)
  • MP200A - Low Cost Quartz Crystal (CTS)
  • MP200A-E - Low Cost Quartz Crystal (CTS)
  • MP200B - Low Cost Quartz Crystal (CTS)
  • MP200B-E - Low Cost Quartz Crystal (CTS)
Other Datasheets by MPS
  • MP2980GR - Synchronous Buck-Boost Controller
  • MP2984 - Synchronous Buck-Boost Controller
  • MP2905 - Synchronous Step-Down Controller
  • MP2905EK - Synchronous Step-Down Controller
  • MP2908A - Synchronous Step-Down Controller
  • MP2908AGF - Synchronous Step-Down Controller
  • MP2908AGL - Synchronous Step-Down Controller
  • MP2935 - 4-Phase PWM Controller

Full PDF Text Transcription

Click to expand full text
MP2980 36V, Synchronous Buck-Boost Controller with Digital Interface and Current Monitor DESCRIPTION The MP2980 is a synchronous, four-switch, buck-boost controller capable of regulating different output voltages with a wide input voltage (VIN) range and high efficiency. The MP2980 provides a digital interface that supports output voltage (VOUT) configuration, VOUT slewrate control, and constant output current (IOUT) limit configuration. This makes the MP2980 wellsuited for USB power delivery (PD) designs in USB Type-C power supplies. The MP2980 uses valley current control in buck mode and peak current control in boost mode to provide fast load transient response and smooth buck-boost mode transients.
Published: |