Datasheet4U Logo Datasheet4U.com

MP3336AGC - Flash LED Driver

This page provides the datasheet information for the MP3336AGC, a member of the MP3336A Flash LED Driver family.

Description

The MP3336A is a compact, dual-channel, highpower, flash LED driver that can drive up to 2A in flash mode for each LED.

The MP3336A improves image and video quality in low light environments for camera phones.

Features

  • a standard I2C interface, dual LED channels, rich protection modes, and high power density and performance. The MP3336A can also support flash, assist, indicator, and 5V DC modes. The cathodes of the dual-flash LED are referenced to GND, which improves thermal performance in layout. The MP3336A is available in a WLCSP-20 (1.6mmx2.0mm) package. MP3336A Dual-Channel, Flash LED Driver with 2A/Ch and I2C Interface.

📥 Download Datasheet

Datasheet preview – MP3336AGC

📁 Similar Datasheet

  • MP330 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP30 - Power Rheostats (Vishay Siliconix)
  • MP3005 - Current and Voltage Controls Current Transformer (Carlo Gavazzi)
  • MP312 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP320A - Low Cost Quartz Crystal (CTS)
  • MP320A-E - Low Cost Quartz Crystal (CTS)
  • MP320B - Low Cost Quartz Crystal (CTS)
  • MP320B-E - Low Cost Quartz Crystal (CTS)
  • MP3274 - 12-Bit Data Acquisition Subsystem (Exar)
  • MP3275 - 12-Bit Data Acquisition Subsystem (Exar)
Other Datasheets by MPS
  • MP3336A - Flash LED Driver
  • MP3301 - Fixed-Frequency Step-Up Driver
  • MP3301GJ - Fixed-Frequency Step-Up Driver
  • MP3305 - 36V 1.3A Step-up White LED Driver
  • MP3306 - 700kHz Synchronous Step-Up White LED Driver
  • MP3308 - Step-up White LED Driver
  • MP3309 - White LED Driver
  • MP3309A - White LED Driver

Full PDF Text Transcription

Click to expand full text
DESCRIPTION The MP3336A is a compact, dual-channel, highpower, flash LED driver that can drive up to 2A in flash mode for each LED. The MP3336A improves image and video quality in low light environments for camera phones. The MP3336A operates with a selectable 1/2/3/4MHz switching frequency and uses a synchronous, current-mode PWM boost converter to regulate the LED current with two high current sources. The MP3336A provides a highly efficient, optimized solution for smaller PCB spaces. The MP3336A features a standard I2C interface, dual LED channels, rich protection modes, and high power density and performance. The MP3336A can also support flash, assist, indicator, and 5V DC modes. The cathodes of the dual-flash LED are referenced to GND, which improves thermal performance in layout.
Published: |