Datasheet4U Logo Datasheet4U.com

MP3362GJ - Boost LED Driver

This page provides the datasheet information for the MP3362GJ, a member of the MP3362 Boost LED Driver family.

Description

The MP3362 is a fixed-frequency converter ideal for low-current and high-current boost applications.

The low 0.2V feedback voltage offers higher efficiency in white LED driver applications.

The MP3362 regulates the output voltage up to 36V with efficiency as high as 95%.

Features

  • 3V to 36V Input Voltage Range.
  • 4A Peak Current Limit.
  • 0.3μA Shutdown Current.
  • Low 200mV Feedback Voltage.
  • Configurable 200kHz to 2.2MHz fSW.
  • Internal 80mΩ, 40V Power Switch.
  • High Efficiency.
  • Analog and PWM Dimming.
  • Under-Voltage Lockout Protection.
  • Open/Short LED Protection.
  • Short FB Protection.
  • Soft-Start Operation.
  • Thermal Shutdown.
  • Available in a TSOT23-8 Package APPL.

📥 Download Datasheet

Datasheet preview – MP3362GJ

📁 Similar Datasheet

  • MP330 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP30 - Power Rheostats (Vishay Siliconix)
  • MP3005 - Current and Voltage Controls Current Transformer (Carlo Gavazzi)
  • MP312 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP320A - Low Cost Quartz Crystal (CTS)
  • MP320A-E - Low Cost Quartz Crystal (CTS)
  • MP320B - Low Cost Quartz Crystal (CTS)
  • MP320B-E - Low Cost Quartz Crystal (CTS)
  • MP3274 - 12-Bit Data Acquisition Subsystem (Exar)
  • MP3275 - 12-Bit Data Acquisition Subsystem (Exar)
Other Datasheets by MPS

Full PDF Text Transcription

Click to expand full text
MP3362 Single-String, 3V Minimum VIN, 36V VOUT, Boost LED Driver DESCRIPTION The MP3362 is a fixed-frequency converter ideal for low-current and high-current boost applications. The low 0.2V feedback voltage offers higher efficiency in white LED driver applications. The MP3362 regulates the output voltage up to 36V with efficiency as high as 95%. Current mode regulation and external compensation components allow the MP3362 control loop to be optimized across a wide variety of input voltages. The MP3362 supports analog dimming and PWM dimming on the same pin. A <2kHz input dimming frequency initiates PWM dimming, while an >5kHz input initiates analog dimming.
Published: |