Datasheet4U Logo Datasheet4U.com

MP3370 - Boost LED Driver

Description

The MP3370 is a fixed-frequency boost converter with current source.

It is ideal for medium-to-high current boost LED driver applications.

The MP3370 regulates the output voltage up to 38V to drive more LEDs with an integrated 100mΩ/50V low-side MOSFET.

Features

  • Input Range of 3.5V to 36V.
  • More than 3A Peak Current Limit.
  • Internal 100mΩ 50V Power Switch.
  • Analog/PWM Dimming.
  • High Efficiency.
  • Under-Voltage Lockout Protection.
  • LED Open/Short Protection.
  • Inductor/Diode Short Protection.
  • 43.5V Over-Voltage Protection.
  • Soft-Start Operation.
  • Thermal Shutdown.
  • SOIC8-EP Package.

📥 Download Datasheet

Datasheet preview – MP3370

Datasheet Details

Part number MP3370
Manufacturer MPS
File Size 1.31 MB
Description Boost LED Driver
Datasheet download datasheet MP3370 Datasheet
Additional preview pages of the MP3370 datasheet.

📁 Similar Datasheet

  • MP330 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP30 - Power Rheostats (Vishay Siliconix)
  • MP3005 - Current and Voltage Controls Current Transformer (Carlo Gavazzi)
  • MP312 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP320A - Low Cost Quartz Crystal (CTS)
  • MP320A-E - Low Cost Quartz Crystal (CTS)
  • MP320B - Low Cost Quartz Crystal (CTS)
  • MP320B-E - Low Cost Quartz Crystal (CTS)
  • MP3274 - 12-Bit Data Acquisition Subsystem (Exar)
  • MP3275 - 12-Bit Data Acquisition Subsystem (Exar)
Other Datasheets by MPS
  • MP3371 - Boost WLED Driver
  • MP3372 - 8-Channel 50V Sync-Boost WLED Driver
  • MP3378E - 4-Channel WLED Controller
  • MP3301 - Fixed-Frequency Step-Up Driver
  • MP3301GJ - Fixed-Frequency Step-Up Driver
  • MP3305 - 36V 1.3A Step-up White LED Driver
  • MP3306 - 700kHz Synchronous Step-Up White LED Driver
  • MP3308 - Step-up White LED Driver

Full PDF Text Transcription

Click to expand full text
MP3370 Single String, 38V Vout Boost LED Driver with Current Source DESCRIPTION The MP3370 is a fixed-frequency boost converter with current source. It is ideal for medium-to-high current boost LED driver applications. The MP3370 regulates the output voltage up to 38V to drive more LEDs with an integrated 100mΩ/50V low-side MOSFET. The peak current-mode regulation and external compensation components allow the MP3370 control loop to be optimized over a wide variety of input voltage, output voltage, and load current applications. The internal soft-start, cycle-by-cycle current limiting and input under voltage lockout prevent overstressing or damage to sensitive external circuitry at start-up and fault conditions.
Published: |