Datasheet4U Logo Datasheet4U.com

MP3387L - White LED Driver

Description

The MP3387L is a step-up converter with 6channel current sources.

It is designed for driving the white LED arrays as backlighting of middle or large size LCD panel.

The MP3387L uses peak-current mode as its PWM control architecture.

Features

  • external digital PWM dimming and analog dimming, both of which sharing a single input with 25% PWM duty cycle as a transfer point. The mix-dimming strategy helps to improve the dimming ratio. Also, MP3387L automatically transfers the PWM input signal 100Hz to 20kHz frequency to 24kHz to 27.5kHz to eliminate the audible noise. MP3387L has rich protection modes to guarantee safety operation. The protection modes include recoverable OCP (over-current protection), OVP (over-voltage protection), OTP.

📥 Download Datasheet

Datasheet preview – MP3387L

📁 Similar Datasheet

  • MP330 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP30 - Power Rheostats (Vishay Siliconix)
  • MP3005 - Current and Voltage Controls Current Transformer (Carlo Gavazzi)
  • MP312 - (MP312 / MP330) Power Film Resistors (Caddock)
  • MP320A - Low Cost Quartz Crystal (CTS)
  • MP320A-E - Low Cost Quartz Crystal (CTS)
  • MP320B - Low Cost Quartz Crystal (CTS)
  • MP320B-E - Low Cost Quartz Crystal (CTS)
  • MP3274 - 12-Bit Data Acquisition Subsystem (Exar)
  • MP3275 - 12-Bit Data Acquisition Subsystem (Exar)
Other Datasheets by MPS

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology MP3387L Step-up, 6 strings, Max.45mA/string, Combined Analog and PWM dimming, White LED Driver DESCRIPTION The MP3387L is a step-up converter with 6channel current sources. It is designed for driving the white LED arrays as backlighting of middle or large size LCD panel. The MP3387L uses peak-current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It generates an output voltage up to 45V from a 3V to 26V input supply. The MP3387L independently regulates the current in each LED string to the value set by an external current-setting resistor. The MP3387L applies 6 internal current sources in each LED string terminal to achieve a current balance with 3% current regulation accuracy between strings.
Published: |