Datasheet4U Logo Datasheet4U.com

MP3910GK - Boost PWM Controller

Download the MP3910GK datasheet PDF. This datasheet also covers the MP3910 variant, as both devices belong to the same boost pwm controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP3910 is a Peak Current Mode PWM controller that can drive an external MOSFET capable of handling more than 10A current.

It has a typical operational current of 288µA and can accommodate flyback, boost for nonisolated and isolated applications.

Key Features

  • 5V to 35V Supply Voltage Range(1).
  • 1A 12V MOSFET Gate Driver.
  • External Soft-Start.
  • Pulse Skipping Operation with Light Load.
  • Programmable Switching Frequency (30kHz-to-400kHz).
  • Frequency Synchronizable from 80kHz-to- 400kHz.
  • Cycle-by-Cycle Current Limit.
  • Over Voltage Protection.
  • Short Circuit Protection.
  • Over Temperature Protection.
  • Available in an MSOP10 Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP3910-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP30 Power Rheostats Vishay Siliconix
MP3005 Current and Voltage Controls Current Transformer Carlo Gavazzi
MP312 (MP312 / MP330) Power Film Resistors Caddock
MP320A Low Cost Quartz Crystal CTS
MP320A-E Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP3910 Boost PWM Controller
MP3910A Peak Current Mode Boost PWM Controller
MP3910AGS Peak Current Mode Boost PWM Controller
MP3908 Current Mode PWM Controller
MP3908DK Current Mode PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP3910 Peak Current Mode Boost PWM Controller with Programmable Frequency, The Future of Analog IC Technology External Soft Start, and Light Load Operation DESCRIPTION The MP3910 is a Peak Current Mode PWM controller that can drive an external MOSFET capable of handling more than 10A current. It has a typical operational current of 288µA and can accommodate flyback, boost for nonisolated and isolated applications. Current mode control provides inherently simple loop compensation and cycle-by-cycle current limit. Under-voltage lockout, soft-start, internal regulated supply and slope compensation are all provided to minimize the external component count. While designed for Flyback applications, the MP3910 can also be used for other topologies including Boost, Forward and Sepic.