Datasheet4U Logo Datasheet4U.com

MP5025C - Hot-Swap Protection Device

Features

  • The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the output. The slew rate is controlled by an external capacitor at SS. The maximum load at the output is currentlimited through sense FET topology. The magnitude of the current limit is controlled by a low-power resistor.

📥 Download Datasheet

Datasheet preview – MP5025C

📁 Similar Datasheet

  • MP502 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP502M - High Current Glass Passivated Molding Single-Phase Bridge Rectifier (Leshan Radio Company)
  • MP502W - Single Phase Bridge Rectifier (MCC)
  • MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5005 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005W - Single Phase Bridge Rectifier (MCC)
  • MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5009 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
Other Datasheets by MPS
  • MP5025CGQV - Hot-Swap Protection Device
  • MP5023 - hot-swap protection
  • MP5026 - 16V 20A Hot-Swap Intelli-Fuse Solution
  • MP5029-C - USB Charging Port Controller
  • MP5029GD-C - USB Charging Port Controller
  • MP5000 - 5A Programmable Current Limit Switch
  • MP5000A - 5A Programmable Current Limit Switch
  • MP5000ADQ - 5A Programmable Current Limit Switch

Full PDF Text Transcription

Click to expand full text
MP5025C 16V, 15A, 3mΩ RDS_ON, Hot-Swap Protection Device with Current Monitoring NOT RECOMMENDED FOR NEW DESIGNS, REFER TO MP5022C DESCRIPTION FEATURES The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the output. The slew rate is controlled by an external capacitor at SS. The maximum load at the output is currentlimited through sense FET topology. The magnitude of the current limit is controlled by a low-power resistor from ISET to ground.
Published: |