Datasheet4U Logo Datasheet4U.com

MP5035 - Configurable Current Limit Switch

Description

The MP5035 is a protection device designed to protect circuitry on the output from transients on the input.

It also protects the input from shorts and transients on the output.

During start-up, the inrush current is limited by the slew rate at the output.

Features

  • Wide 2.9V to 22V Operating Input Voltage (VIN) Range.
  • 26V Absolute Maximum Transient VIN.
  • Integrated 82mΩ Power MOSFET.
  • Adjustable Current Limit or Fixed Current Limit when Floating the ILIMIT Pin.
  • Soft-Start Time Configurable through the DV/DT Pin.
  • Fast Response for Hard Short Protection.
  • Over-Current Protection (OCP) with Hiccup Mode.
  • Thermal Shutdown and Automatic Retry.
  • Available in a TSOT23-6 Package.

📥 Download Datasheet

Datasheet preview – MP5035

Datasheet Details

Part number MP5035
Manufacturer MPS
File Size 910.30 KB
Description Configurable Current Limit Switch
Datasheet download datasheet MP5035 Datasheet
Additional preview pages of the MP5035 datasheet.

📁 Similar Datasheet

  • MP503 - Air-Quality Gas Sensor (Winsen)
  • MP503 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5005 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005W - Single Phase Bridge Rectifier (MCC)
  • MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5009 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP500B - Low Cost Quartz Crystal (CTS)
Other Datasheets by MPS
  • MP5035GJ - Configurable Current Limit Switch
  • MP5031 - USB PD Port Controller
  • MP5032 - QC 3.0 Controller
  • MP5032GJ - QC 3.0 Controller
  • MP5034 - USB Charging Port Controller
  • MP5034GJ - USB Charging Port Controller
  • MP5036 - Current Limit Switch
  • MP5036A - 0.4A to 5A Current Limit Switch

Full PDF Text Transcription

Click to expand full text
MP5035 2.9V to 22V, 50mA to 2A, Configurable Current Limit Switch in TSOT23-6 Package DESCRIPTION The MP5035 is a protection device designed to protect circuitry on the output from transients on the input. It also protects the input from shorts and transients on the output. During start-up, the inrush current is limited by the slew rate at the output. The slew rate is controlled by the DV/DT pin. The output load maximum is current-limited. The current-limit value is controlled by an external resistor connected from the ILIMIT pin to GND. When ILIMIT is floating, the current limit is fixed at 300mA. The MP5035 is available in a TSOT23-6 package. FEATURES • Wide 2.
Published: |