Datasheet4U Logo Datasheet4U.com

MP5073GG - 5.5V 2A Low RDSON Load Switch

This page provides the datasheet information for the MP5073GG, a member of the MP5073 5.5V 2A Low RDSON Load Switch family.

Description

The MP5073 provides up to 2A load protection over a 0.5V to 5.5V voltage range.

With the small RDSON in tiny package, MP5073 is a very high efficiency and space saving solution for notebooks, tablets, and other portable/batteryoperated applications.

Features

  • The max load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from the ILIM pin to ground. An internal charge pump drives the gate of the power device, allowing a very low on-resistance DMOS power FET of just 50mΩ. The MP5073 is available in a tiny 12-pin 2mmx2mm QFN package.

📥 Download Datasheet

Datasheet preview – MP5073GG

📁 Similar Datasheet

  • MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5005 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005W - Single Phase Bridge Rectifier (MCC)
  • MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5009 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP500B - Low Cost Quartz Crystal (CTS)
  • MP500B-E - Low Cost Quartz Crystal (CTS)
  • MP501 - PRESS-FIT MOTOLOLA DIODES (Shunye)
Other Datasheets by MPS

Full PDF Text Transcription

Click to expand full text
MP5073 5.5V, 2A Low RDSON Load Switch With Programmable Current Limit DESCRIPTION The MP5073 provides up to 2A load protection over a 0.5V to 5.5V voltage range. With the small RDSON in tiny package, MP5073 is a very high efficiency and space saving solution for notebooks, tablets, and other portable/batteryoperated applications. With the soft start function, the MP5073 can avoid inrush current during circuit start up. MP5073 also provides programmable soft start time, output discharge functions, OCP and thermal shutdown features. The max load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from the ILIM pin to ground.
Published: |