Datasheet4U Logo Datasheet4U.com

MP6003 - Monolithic Flyback/SEPIC DC-DC Converter

General Description

The MP6003 is a monolithic flyback DC-DC converter which includes a 150V power switch and is capable of delivering up to 15W output power.

It can also be used for SEPIC boost and Flyback and Forward applications.

The MP6003 uses the fixed-frequency peak current mode primary controller architecture.

Key Features

  • Integrated 0.9Ω 150V Power Switch.
  • Cycle-by-Cycle Current Limiting.
  • Programmable Switching Frequency.
  • Duty Cycle Limiting with Line Feed Forward.
  • Integrated 100V Startup Circuit.
  • Internal Slope Compensation.
  • Disable Function.
  • Built-in Soft-Start.
  • Line Under Voltage Lockout.
  • Line Over Voltage Protection.
  • Auto-Restart for Opened/Shorted Output.
  • Zero Load Regulation.
  • Thermal Shutdow.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP6005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP60-F KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP601 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP602 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP6003DN Monolithic Flyback/SEPIC DC-DC Converter
MP6002 Monolithic Flyback/Forward DC-DC Converter
MP6002DN Monolithic Flyback/Forward DC-DC Converter
MP6004 Primary-Side Regulated Flyback/Buck 80V DCDC Converter
MP6004GQ Primary-Side Regulated Flyback/Buck 80V DCDC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP6003 is a monolithic flyback DC-DC converter which includes a 150V power switch and is capable of delivering up to 15W output power. It can also be used for SEPIC boost and Flyback and Forward applications. The MP6003 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. The MP6003 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired. The MP6003 is ideal for telecom applications, and is available in a compact, thermally enhanced SOIC8 package with an exposed pad.