Datasheet4U Logo Datasheet4U.com

MP6514GGU - H-Bridge Motor Driver

Download the MP6514GGU datasheet PDF. This datasheet also covers the MP6514 variant, as both devices belong to the same h-bridge motor driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP6514 is an H-bridge motor driver that consists of four N-channel power MOSFETs.

Key Features

  • Wide 2.5V to 14V Operating Input Range O.
  • Peak Current: 0.6A F.
  • Low MOSFET On Resistance (HS: 500mΩ, necessary gate drive voltages. The MP6514 can drive two DC motors in a single-ended connection with separate controls D for the high-side or low-side MOSFETs. The motor can be connected to either the supply or E GND. D The MP6514 operates on a motor power supply S voltage from 2.5V to 14V, which can supply an N 3 output current of up to 0.6A according to the E N opera.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP6514-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP6501A Power Transistor Toshiba Semiconductor
MP6 AC-DC / Configurable Emerson
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP60-F KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP6005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP6514 H-Bridge Motor Driver
MP6510 Single-Phase Brushless DC Motor Driver
MP6513 H-Bridge Motor Driver
MP6513GJ H-Bridge Motor Driver
MP6513L H-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP6514 2.5V - 14V, H-Bridge Motor Driver with Separate Controls for Each MOSFET DESCRIPTION The MP6514 is an H-bridge motor driver that consists of four N-channel power MOSFETs. An internal charge pump generates the R FEATURES • Wide 2.5V to 14V Operating Input Range O • Peak Current: 0.6A F • Low MOSFET On Resistance (HS: 500mΩ, necessary gate drive voltages. The MP6514 can drive two DC motors in a single-ended connection with separate controls D for the high-side or low-side MOSFETs. The motor can be connected to either the supply or E GND. D The MP6514 operates on a motor power supply S voltage from 2.5V to 14V, which can supply an N 3 output current of up to 0.6A according to the E N operation.