MP6515 Datasheet | Monolithic Power Systems

DESCRIPTION The MP6515 is an H-bridge motor driver. It operates from a supply voltage of up to 35V and delivers motor current up to 2.8A. Typically, the MP6515 is used to drive a DC brush motor. For the MP6515, control of the outputs is acplished through the PHASE, ENBL, BRAKE, and BMODE pins. An internal current sensing circuit provides an output with voltage proportional to the load current. In addition, cycle-by-cycle current regulation/limiting is provided. These features do not require the use of a low-ohm shunt resistor. Internal safety features include over-current protection, input over-voltage protection, undervoltage lockout (UVLO), and thermal shutdown. The MP6515 is available in 16-pin 5.0mmx6.4mm TSSOP-EP and 3mmx4mm QFN package with exposed thermal pad. TYPICAL APPLICATION 35V, 2.8A, Phase/Enable Control H-Bridge Motor Driver in QFN 3x4 and TSSOP-EP Packages FEATURES - Wide 5.4V to 35V Input Voltage Range - 2.8A Peak Output Current - Internal Full H-Bridge Driver - PHASE/ENABLE control, input logic (PHASE, EN, BRAKE, BMODE) - Cycle-by-Cycle Current Regulation/Limit - Low On Resistance (HS:250mΩ;LS:250mΩ) - Simple, Versatile Logic Interfaces - 3.3V and 5V patible Logic Supply - Over-Current Protection - Over-Voltage Protection - Thermal Shutdown - Under-Voltage Lockout - Fault Indication Output - Thermally Enhanced Surface-Mount Package APPLICATIONS - Solenoid Drivers - DC Brush Motor Drive All MPS parts are lead-free, halogen free, and adhere to the Ro HS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. MP6515 Rev. 1.03 .Monolithic Power. 3/21/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2019 MPS. All Rights Reserved. - 35V, 2.8A, PHASE/ENABLE CONTROL, H-BRIDGE MOTOR DRIVER ORDERING INFORMATION Part Number- MP6515GF- MP6515GL- -...