Datasheet4U Logo Datasheet4U.com

MP6602GV - Stepper Motor Driver

Download the MP6602GV datasheet PDF. This datasheet also covers the MP6602 variant, as both devices belong to the same stepper motor driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP6602 is a stepper motor driver with a built-in indexer/translator and internal current regulation.

The internal current sense means that the MP6602 does not require external current-sense resistors.

The MP6602 operates across a 4.5V to 35V input voltage (VIN) range.

Key Features

  • include rotor stall detection, open load detection, overcurrent protection (OCP), input over-voltage protection (OVP) and under-voltage protection (UVP), thermal warning, ad thermal shutdown. The automatic hold current mode can lower the winding current to automatically save power when a full current is not required, such as when the motor is stopped or lightly loaded. The motor’s back EMF (BEMF) can be measured. The BEMF can be read via the serial interface for advanced diagnostic and control f.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP6602-MPS.pdf) that lists specifications for multiple related part numbers.

More Datasheets from Monolithic Power Systems

Part Number Description
MP6602 Stepper Motor Driver
MP6600 Stepper Motor Driver
MP6600GR Stepper Motor Driver
MP6600L 1.5A Stepper Motor Driver
MP6600LGR 1.5A Stepper Motor Driver
MP6603 55V Dual Full-Bridge Motor Driver
MP6604A Dual H-Bridge Motor Driver
MP6604B Simple Dual H-Bridge Driver
MP6604C Simple Dual H-Bridge Driver
MP6605C 4-Channel Low-Side Driver

Full PDF Text Transcription for MP6602GV (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for MP6602GV. For precise diagrams, tables, and layout, please refer to the original PDF.

MP6602 35V, Stepper Motor Driver with Stall Detection and Serial Interface DESCRIPTION The MP6602 is a stepper motor driver with a built-in indexer/translator and interna...

View more extracted text
a stepper motor driver with a built-in indexer/translator and internal current regulation. The internal current sense means that the MP6602 does not require external current-sense resistors. The MP6602 operates across a 4.5V to 35V input voltage (VIN) range. It can deliver a motor current up to 4A per phase, depending on the ambient temperature and PCB layout. The MP6602 can operate a bipolar or unipolar stepper motor in full, half-, quarter-, eighth-, 1/16-, and 1/32-step modes.