MP8765GQ Datasheet | Monolithic Power Systems

DESCRIPTION The MP8765 is a fully integrated high frequency synchronous rectified step-down switch mode converter. It offers very pact solutions to achieve 6A continuous output current over a wide input supply range with excellent load and line regulation. The MP8765 operates at high efficiency over a wide output current load range. Constant-On-Time (COT) control mode provides fast transient response and eases loop stabilization. Under voltage lockout is internally set as 4.6 V, An open drain power good signal indicates the output is within its nominal voltage range. Full protection features include OCP and thermal shut down. The converter requires minimum number of external ponents and is available in QFN16 (3mmx3mm) package. TYPICAL APPLICATION MP8765 24V, 6A High Efficiency Synchronous Step-down Converter FEATURES - Wide 5V to 24V Operating Input Range - 6A Continuous Output Current - PFM/PWM Mode Selectable - Low RDS(ON) Internal Power MOSFETs - Proprietary Switching Loss Reduction Technique - 1% Reference Voltage - 7ms Internal Soft Start - Output Discharge - 500k Hz Switching Frequency - Hiccup OCP Protection and Thermal Shutdown - Auto Retry OVP Protection - Output Adjustable from 0.604V to 5.5V APPLICATIONS - Laptop puter - Tablet PC - Networking Systems - Personal Video Recorders - Flat Panel Television and Monitors - Distributed Power Systems All MPS parts are lead-free and adhere to the Ro HS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. MP8765 Rev. 1.1 .Monolithic Power. 7/23/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2019 MPS. All Rights Reserved. MP8765 ─ 24V, HIGH CURRENT SYNCHRONOUS STEP-DOWN CONVERTER ORDERING INFORMATION Part Number- MP8765GQ Package QFN16(3x3mm) Top Marking AHR - For Tape & Reel, add...