Datasheet4U Logo Datasheet4U.com

MP9486AGN - Switching Current Limit Step-Down Converter

This page provides the datasheet information for the MP9486AGN, a member of the MP9486A Switching Current Limit Step-Down Converter family.

Description

The MP9486A is a high-voltage, step-down, switching regulator that delivers up to 1A of continuous current to the load.

It integrates a high-side, high-voltage, power MOSFET with a current limit of 3.5A, typically.

Features

  • Wide 4.5V to 100V Input Range.
  • 3.5A Typical Peak Switching Current Limit.
  • Hysteretic Control: No Compensation.
  • Up to 1MHz Switching Frequency.
  • PWM Dimming Control Input for LED.

📥 Download Datasheet

Datasheet preview – MP9486AGN

Datasheet Details

Part number MP9486AGN
Manufacturer MPS
File Size 922.27 KB
Description Switching Current Limit Step-Down Converter
Datasheet download datasheet MP9486AGN Datasheet
Additional preview pages of the MP9486AGN datasheet.

📁 Similar Datasheet

  • MP900 - Ultra High Sensitivity Gateable Photon Counting Module (PerkinElmer)
  • MP901 - Air-Quality Gas Sensor (Winsen)
  • MP9141 - Monolithic step-down switch mode converter (HUAFUQIN ELECTRONICS)
  • MP915 - Power Film Resistors (Caddock)
  • MP916 - Power Film Resistors (Caddock)
  • MP925 - Power Film Resistors (Caddock)
  • MP930 - Power Film Resistors (Caddock)
  • MP962-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
  • MP963-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
  • MP972-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
Other Datasheets by MPS
  • MP9486A - Switching Current Limit Step-Down Converter
  • MP9486 - Step-Down Converter
  • MP9486GN - Step-Down Converter
  • MP9485 - Step-Down Converter
  • MP9485GN - Step-Down Converter
  • MP9487 - Switching Current Limit Step-Down Converter
  • MP9487GN - Switching Current Limit Step-Down Converter
  • MP9488 - Step-Down Regulator

Full PDF Text Transcription

Click to expand full text
MP9486A 100V Input, 3.5A, Switching Current Limit Step-Down Converter DESCRIPTION The MP9486A is a high-voltage, step-down, switching regulator that delivers up to 1A of continuous current to the load. It integrates a high-side, high-voltage, power MOSFET with a current limit of 3.5A, typically. The wide 4.5V to 100V input range accommodates a variety of step-down applications, making it ideal for automotive, industry, and lighting applications. Hysteretic voltage-mode control is employed for very fast response. MPS’s proprietary feedback control scheme minimizes the number of required external components. The switching frequency can be up to 1MHz, allowing for small component size. Thermal shutdown and short-circuit protection (SCP) provide reliable and fault-tolerant operations.
Published: |