Datasheet4U Logo Datasheet4U.com

MP9841 - Synchronous Step-Down Converter

Description

The MP9841 is a high-frequency, synchronous, rectified, step-down, switch-mode converter with built-in power MOSFETs.

It offers a very compact solution that achieves 1A of continuous output current with excellent load and line regulation over a wide 3.3V to 36V input supply range.

Features

  • include over-current protection (OCP), short-circuit protection (SCP), and thermal shutdown. An open-drain power good (PG) signal indicates when the output is within 10% of its nominal voltage. The MP9841 is available in a space-saving QFN-16 (3mmx4mm) package.

📥 Download Datasheet

📁 Similar Datasheet

  • MP900 - Ultra High Sensitivity Gateable Photon Counting Module (PerkinElmer)
  • MP901 - Air-Quality Gas Sensor (Winsen)
  • MP9141 - Monolithic step-down switch mode converter (HUAFUQIN ELECTRONICS)
  • MP915 - Power Film Resistors (Caddock)
  • MP916 - Power Film Resistors (Caddock)
  • MP925 - Power Film Resistors (Caddock)
  • MP930 - Power Film Resistors (Caddock)
  • MP962-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
  • MP963-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
  • MP972-2 - Single Photon Counting Module (PerkinElmer Optoelectronics)
Other Datasheets by MPS
  • MP9842 - Step-Down Converter
  • MP9842GL - Step-Down Converter
  • MP9148 - SYNC Buck Regulator
  • MP9148GJ - SYNC Buck Regulator
  • MP9159A - COT Synchronous Step-Down Converter
  • MP9161A - COT Synchronous Step-Down Converter
  • MP9184 - Synchronous Boost Converter
  • MP9186 - 20V 6A Synchronous Step-Down Converter

Full PDF Text Transcription

Click to expand full text
MP9841 36V, 1A, Low IQ, Synchronous Step-Down Converter DESCRIPTION The MP9841 is a high-frequency, synchronous, rectified, step-down, switch-mode converter with built-in power MOSFETs. It offers a very compact solution that achieves 1A of continuous output current with excellent load and line regulation over a wide 3.3V to 36V input supply range. The switching frequency can be programmed or synchronized to an external clock in the range of 350kHz to 2.5MHz. The synchronous operation and ultralow 14μA sleep mode quiescent current provide high efficiency over the output current load range, allowing the MP9841 to be used in a variety of step-down applications in automotive input environments and battery-powered applications.
Published: |