Datasheet4U Logo Datasheet4U.com

MPQ6411GS - Windowed Watchdog Timer

Download the MPQ6411GS datasheet PDF. This datasheet also covers the MPQ6411 variant, as both devices belong to the same windowed watchdog timer family and are provided as variant models within a single manufacturer datasheet.

General Description

The MPQ6411 is a windowed watchdog timer.

It is used to reset and monitor the microcontroller.

In normal operation, the MCU sends a trigger signal to the MPQ6411 in a defined time window cyclically.

Key Features

  • Windowed Watchdog.
  • Power-On Reset during Power-Up and Under Voltage.
  • Programmable Short Window Mode or Long Window Mode.
  • Watchdog Disable Function.
  • Low Shutdown Mode Current.
  • SOIC8 Package.
  • Available in AEC-Q100 Grade 1.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MPQ6411-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MPQ6426 Quad Darlington Transistor Motorola
MPQ6427 NPN Darlington Transistor National Semiconductor
MPQ6427 QUAD DARLINGTON TRANSISTOR Motorola
MPQ6001 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola
MPQ6002 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola

Other Datasheets by Monolithic Power Systems

Part Number Description
MPQ6411 Windowed Watchdog Timer
MPQ6400 Low Quiescent Current Programmable-Delay Voltage Supervisor
MPQ6526 Hex Half-Bridge Motor Driver
MPQ6527 40V 0.8A 10-Channel Half-Bridge Motor Driver
MPQ6528 H-Bridge Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MPQ6411 is a windowed watchdog timer. It is used to reset and monitor the microcontroller. In normal operation, the MCU sends a trigger signal to the MPQ6411 in a defined time window cyclically. A missing or fault trigger signal causes the watchdog to reset the MCU. The MPQ6411 provides a reset signal (lowlevel voltage) to the MCU during power-up or under voltage. Its power supply (VCC) has 5V and 3.3V options. By setting MODE to high or low, the watchdog operates in long window mode or short window mode; the window is programmable. The MPQ6411 is available in SOIC8 package.