NB686 Datasheet | Monolithic Power Systems

28 V, 8 A, Low Iq, High Current Synchronous Buck Converter with +/- 1 A LDO and Bufferd Refference DESCRIPTION The NB686 provides a plete power supply with the highest density for DDR3, DDR3L, LPDDR3, and DDR4 memory. It integrates a high-frequency, synchronous, rectified, stepdown, switch-mode converter (VDDQ) with a 1 A sink/source LDO (VTT) and buffered low noise reference (VTTREF). The NB686 operates at high efficiency over a wide output current load range based on MPS proprietary switching loss reduction technology and internal low Ron power MOSFETs. Adaptive constant-on-time (COT) control mode provides fast transient response and eases loop stabilization. The DC auto-tune loop provides good load and line regulation. The VTT LDO provides 1 A sink/source current capability and requires only 22 μF ceramic capacitors. The VTTREF tracks VDDQ/2 with excellent 1% accuracy. Full protection Features include OC limit, OVP, UVP, thermal shutdown, and over-temperature warning (OTW). The converter requires a minimum number of external ponents, and it is available in a QFN 3mm x 3mm package. TYPICAL APPLICATION Features - Wide 4.5 V to 28 V Operating Input Range - patible for IMVP8 - 135 μA Low Quiescent Current - 8 A Continous Output Current - 9A Peak Output Current - Selectable Ultrasonic Mode - Selectable 500 k Hz/700 k Hz Switching Frequency - Built-In +/- 1 A VTTLDO - 1% Buffered VTTREF Output - Adaptive COT for Fast Transient - DC Auto-Tune Loop - Stable with POSCAP and Ceramic Output Capacitors - Over-Temperature Warning - Internal Soft Start - Output Discharge - OCL, OVP, UVP, and Thermal Shutdown - Latch-Off Re-set via EN or Power Cycle - QFN 3mm x 3mm...