MY8103 Datasheet | MY-Semi

MY-Semi Preliminary 65V 1A mon Anode Capable LED Driver With Internal Switch and Wide-Range Current Sense General Description The MY8103 is a mon anode capable step-down constant-current LED driver with internal MOSFET and wide-range current sense. The MY8103 provides a cost-effective design solution for architectural and ambient lighting, LED bulbs, and other LED applications. The MY8103 operates from a +8V to +65V input voltage range and can provide an output current up to 1A. Output current of MY8103 is set by an external resistor connected between CSP and CSN pins. Dimming is controlled by an external control signal to the VDIM pin. The VDIM pin accepts either a DC voltage or a PWM signal, and applying a voltage of 0.4V or lower to the VDIM pin turns off the output current. The MY8103SE has two error outputs to indicate various fault conditions. Applications ❑ Architectural, Industrial and Ambient Lighting ❑ Indicator and Emergency Lighting ❑ Decorative LED Lighting ❑ High Power LED Lighting ❑ Automotive Lighting ❑ Constant Current Source Typical Application Circuit Features ✦ Support LED power up to 65W ✦ High-efficiency solution ✦ Internal 65V MOS switch ✦ Wide current sense mon-mode range from 0 to 65V ✦ Hysteretic control ✦ Up to 1MHz switching frequency ✦ ± 5 % output current accuracy ✦ Single DC/PWM input pin for dimming control ✦ 100mV current-sense reference ✦ Resistor-programmable constant LED current ✦ Inherent open LED protection ✦ Short LED protection ✦ Thermal-shutdown protection ✦ Over current protection ✦ Fault indication for various fault conditions ✦ Soft-start Order information Part MY8103SE Package Information SOP8-EP 2500 pcs/Reel Pin Configuration Mar. 2015 Ver. 0.6 MY-Semi Inc. 0 For pricing, delivery, and...