Datasheet4U Logo Datasheet4U.com

27C2000 - 2M-BIT [256K x 8] CMOS EPROM

General Description

The MX27C2000 is a 5V only, 2M-bit, One Time Programmable Read Only Memory.

Key Features

  • 256Kx 8 organization Single +5V power supply +12.5V programming voltage Fast access time:35/45/55/70/90/100/120/150 ns Totally static operation Completely TTL compatible.
  • Operating current:30mA.
  • Standby current: 100uA.
  • Package type: 32 pin plastic DIP 32 pin SOP 32 pin PLCC 32 pin TSOP(I).

📥 Download Datasheet

Datasheet Details

Part number 27C2000
Manufacturer Macronix
File Size 946.39 KB
Description 2M-BIT [256K x 8] CMOS EPROM
Datasheet download datasheet 27C2000 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
27C2001 2 Mbit 256Kb x 8 UV EPROM and OTP EPROM STMicroelectronics
27C2001 1 Mbit 128Kb x8 UV EPROM and OTP EPROM STMicroelectronics
27C201 MSM27C201 OKI
27C210 1 MEG CMOS EPROM (64K x 16) Philips
27C240 NM27C240 ETC

Other Datasheets by Macronix

Part Number Description
27C2000PC-70 MX27C2000
27C1024 1M-BIT [128K x 8/64K x 16] CMOS EPROM
27C4096 4M-BIT [512K x 8/256K x 16] CMOS EPROM
27C4100 4M-BIT [512K x 8/256K x 16] CMOS EPROM
27C800 8M-BIT [1M x8] CMOS EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MX27C2000 2M-BIT [256K x 8] CMOS EPROM FEATURES • • • • • • 256Kx 8 organization Single +5V power supply +12.5V programming voltage Fast access time:35/45/55/70/90/100/120/150 ns Totally static operation Completely TTL compatible • Operating current:30mA • Standby current: 100uA • Package type: 32 pin plastic DIP 32 pin SOP 32 pin PLCC 32 pin TSOP(I) GENERAL DESCRIPTION The MX27C2000 is a 5V only, 2M-bit, One Time Programmable Read Only Memory. It is organized as 256K words by 8 bits per word, operates from a single + 5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming outside from the system, existing EPROM programmers may be used.