MX27C256 - 256K-BIT [32K x 8] CMOS EPROM

Macronix

General Description

The MX27C256 is a 5V only, 256K-bit, ultraviolet Erasable Programmable Read Only Memory.

Key Features

256K-BIT [32K x 8] CMOS EPROM.
Operating current: 30mA.
Standby current: 100uA.
Package type: - 28 pin plastic DIP - 32 pin PLCC - 28 pin 8 x 13.4mm TSOP(I).
32K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 45/55/70/90/100/120/150 ns Totally static operation Completely TTL compatible.

📥 Download Datasheet

MX27C256 256k-bit [32k x 8] cmos eprom by Macronix - Datasheet Preview

Datasheet Details

Part number	MX27C256
Manufacturer	Macronix
File Size	743.54 KB
Description	256K-BIT [32K x 8] CMOS EPROM
Datasheet	MX27C256 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MX27517	Single 4A Peak Current Low-Side Gate Driver	MAXINMICRO
MX27524	5A Peak Current Dual Channels Low Side Gate Driver	MAXINMICRO
MX2012E	Dual N-Channel Enhancement Mode Power MOSFET	imosemi
MX205Q	Dual Axis Accelerometer	ETC
MX21	CMOS Gate Array	AMI

Other Datasheets by Macronix

Part Number	Description
MX27C2000	2M-BIT [256K x 8] CMOS EPROM
MX27C2000A	2M-BIT [256K x 8] CMOS EPROM
MX27C2048	2M-BIT [256Kx8/128x16] CMOS EPROM
MX27C2100	2M-BIT [256Kx8/128x16] CMOS EPROM
MX27C1000	1M-BIT [128K x 8] CMOS EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MX27C256 FEATURES 256K-BIT [32K x 8] CMOS EPROM • Operating current: 30mA • Standby current: 100uA • Package type: - 28 pin plastic DIP - 32 pin PLCC - 28 pin 8 x 13.4mm TSOP(I) • • • • • • 32K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 45/55/70/90/100/120/150 ns Totally static operation Completely TTL compatible GENERAL DESCRIPTION The MX27C256 is a 5V only, 256K-bit, ultraviolet Erasable Programmable Read Only Memory. It is organized as 32K by 8 bits, operates from a single + 5volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming from outside the system, existing EPROM programmers may be used.