Datasheet4U Logo Datasheet4U.com

MX27C4000 - 4M-BIT [512K x8] CMOS EPROM

Description

The MX27C4000 is a 5V only, 4M-bit, One Time Programmable Read Only Memory.

Features

  • 512K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 90/100/120/150 ns Totally static operation Completely TTL compatible.
  • Operating current: 40mA.
  • Standby current: 100uA.
  • Package type: - 32 pin plastic DIP - 32 pin PLCC/SOP - 32 pin TSOP.

📥 Download Datasheet

Datasheet Details

Part number MX27C4000
Manufacturer Macronix
File Size 930.94 KB
Description 4M-BIT [512K x8] CMOS EPROM
Datasheet download datasheet MX27C4000 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX27517 Single 4A Peak Current Low-Side Gate Driver MAXINMICRO
MX27524 5A Peak Current Dual Channels Low Side Gate Driver MAXINMICRO
MX2012E Dual N-Channel Enhancement Mode Power MOSFET imosemi
MX205Q Dual Axis Accelerometer ETC
MX21 CMOS Gate Array AMI

Other Datasheets by Macronix

Part Number Description
MX27C4000A 4M-BIT [512K x8] CMOS OTP ROM
MX27C4096 4M-BIT [512K x 8/256K x 16] CMOS EPROM
MX27C4100 4M-BIT [512K x 8/256K x 16] CMOS EPROM
MX27C4111 4M-BIT [512K x8/256K x16] CMOS EPROM
MX27C1000 1M-BIT [128K x 8] CMOS EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MX27C4000 4M-BIT [512K x8] CMOS EPROM FEATURES • • • • • • 512K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 90/100/120/150 ns Totally static operation Completely TTL compatible • Operating current: 40mA • Standby current: 100uA • Package type: - 32 pin plastic DIP - 32 pin PLCC/SOP - 32 pin TSOP GENERAL DESCRIPTION The MX27C4000 is a 5V only, 4M-bit, One Time Programmable Read Only Memory. It is organized as 512K words by 8 bits per word, operates from a single +5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming outside from the system, existing EPROM programmers may be used.
Published: |