Datasheet4U Logo Datasheet4U.com

MX27C512 - 512K-BIT [64Kx8] CMOS EPROM

Description

The MX27C512 is a 5V only, 512K-bit, ultraviolet Erasable Programmable Read Only Memory.

Features

  • 64K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 45/55/70/90/100/120/150ns Totally static operation Completely TTL compatible.
  • Operating current: 30mA.
  • Standby current: 100uA.
  • Package type: - 28 pin plastic DIP - 32 pin PLCC - 28 pin 8 x 13.4 mm TSOP(I).

📥 Download Datasheet

Datasheet Details

Part number MX27C512
Manufacturer Macronix
File Size 742.93 KB
Description 512K-BIT [64Kx8] CMOS EPROM
Datasheet download datasheet MX27C512 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX27517 Single 4A Peak Current Low-Side Gate Driver MAXINMICRO
MX27524 5A Peak Current Dual Channels Low Side Gate Driver MAXINMICRO
MX2012E Dual N-Channel Enhancement Mode Power MOSFET imosemi
MX205Q Dual Axis Accelerometer ETC
MX21 CMOS Gate Array AMI

Other Datasheets by Macronix

Part Number Description
MX27C1000 1M-BIT [128K x 8] CMOS EPROM
MX27C1000 1M-BIT [128K x 8] CMOS EPROM
MX27C1000A 1M-BIT [128K x 8] CMOS EPROM
MX27C1001 1M-BIT [128K x 8] CMOS EPROM
MX27C1100 1M-BIT [128K x 8/64K x 16] CMOS EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MX27C512 512K-BIT [64Kx8] CMOS EPROM FEATURES • • • • • • 64K x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 45/55/70/90/100/120/150ns Totally static operation Completely TTL compatible • Operating current: 30mA • Standby current: 100uA • Package type: - 28 pin plastic DIP - 32 pin PLCC - 28 pin 8 x 13.4 mm TSOP(I) GENERAL DESCRIPTION The MX27C512 is a 5V only, 512K-bit, ultraviolet Erasable Programmable Read Only Memory. It is organized as 64K words by 8 bits per word, operates from a single +5volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming outside from the system, existing EPROM programmers may be used.
Published: |