Datasheet4U Logo Datasheet4U.com

MX27C8000A - 8M-BIT [1M x8] CMOS EPROM

Description

The MX27C8000A is a 5V only, 8M-bit, ultraviolet Erasable Programmable Read Only Memory.

Features

  • 1M x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 90/100/120/150 ns Totally static operation Completely TTL compatible.
  • Operating current: 60mA.
  • Standby current: 100uA.
  • Package type: 32 pin plastic DIP 32 pin PLCC 32 pin SOP 32 pin TSOP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX27517 Single 4A Peak Current Low-Side Gate Driver MAXINMICRO
MX27524 5A Peak Current Dual Channels Low Side Gate Driver MAXINMICRO
MX2012E Dual N-Channel Enhancement Mode Power MOSFET imosemi
MX205Q Dual Axis Accelerometer ETC
MX21 CMOS Gate Array AMI

Other Datasheets by Macronix

Part Number Description
MX27C8000 8M-BIT [1M x8] CMOS EPROM
MX27C8100 8M-BIT [1M x8/512K x16] CMOS OTP ROM
MX27C8111 8M-BIT [1M x8/512K x16] CMOS OTP ROM WITH PAGE MODE
MX27C1000 1M-BIT [128K x 8] CMOS EPROM
MX27C1000 1M-BIT [128K x 8] CMOS EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADVANCE INFORMATION MX27C8000A 8M-BIT [1M x8] CMOS EPROM FEATURES • • • • • • 1M x 8 organization Single +5V power supply +12.5V programming voltage Fast access time: 90/100/120/150 ns Totally static operation Completely TTL compatible • Operating current: 60mA • Standby current: 100uA • Package type: 32 pin plastic DIP 32 pin PLCC 32 pin SOP 32 pin TSOP GENERAL DESCRIPTION The MX27C8000A is a 5V only, 8M-bit, ultraviolet Erasable Programmable Read Only Memory. It is organized as 1M words by 8 bits per word, operates from a single +5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming outside from the system, existing EPROM programmers may be used.
Published: |