MX29LA128MT
MX29LA128MT is 128M-BIT SINGLE VOLTAGE 3V ONLY BOOT SECTOR FLASH MEMORY manufactured by Macronix.
- Part of the MX29LA128MB comparator family.
- Part of the MX29LA128MB comparator family.
FEATURES
GENERAL FEATURES
- Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
- Configuration
- 16,777,216 x 8 / 8,388,608 x 16 switchable
- Sector structure ..
- 8KB(4KW) x 8 and 64KB(32KW) x 255
- Latch-up protected to 250m A from -1V to VCC + 1V
- Low VCC write inhibit is equal to or less than 1.5V
- patible with JEDEC standard
- Pin-out and software patible to single power supply Flash PERFORMANCE
- High Performance
- Fast access time: 90R/100ns
- Page read time: 25ns
- Sector erase time: 0.5s (typ.)
- 4 word/8 byte page read buffer
- 16 word/ 32 byte write buffer: reduces programming time for multiple-word/byte updates
- Low Power Consumption
- Active read current: 18m A(typ.)
- Active write current: 20m A(typ.)
- Standby current: 20u A(typ.)
- Minimum 100,000 erase/program cycle
- 20-years data retention SOFTWARE FEATURES
- Support mon Flash Interface (CFI)
- Flash device parameters stored on the device and provide the host system to access.
- Program Suspend/Program Resume
- Suspend program operation to read other sectors
- Erase Suspend/ Erase Resume
- Suspends sector erase operation to read data/program other sectors
- Status Reply
- Data# polling & Toggle bits provide detection of program and erase operation pletion HARDWARE FEATURES
- Ready/Busy (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation pletion
- Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
- WP#/ACC input
- Write protect (WP#) function allows protection of all sectors, regardless of sector protection settings
- ACC (high voltage) accelerates programming time for higher throughput during system SECURITY
- Sector Protection/Chip...
