MX29LV320MB Datasheet | Macronix

FEATURES 32M-BIT [4M x 8/2M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY - Minimum 100,000 erase/program cycle - 20-year data retention SOFTWARE FEATURES - Support mon Flash Interface (CFI) - Flash device parameters stored on the device and provide the host system to access - Program Suspend/Resume - Suspend program operation to read other sectors - Erase Suspend/Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased - Status Reply - Data# polling & Toggle bits provide detection of program and erase operation pletion HARDWARE FEATURES - Ready/Busy (RY/BY#) Output - Provides a hardware method of detecting program and erase operation pletion - Hardware Reset (RESET#) Input - Provides a hardware method to reset the internal state machine to read mode - WP#/ACC input - Write protect (WP#) function allows protection of two outermost boot sectors, regardless of sector protect status - ACC (high voltage) accelerates programming time for higher throughput during system PACKAGE - 44-pin SOP - 48-pin TSOP - 48-ball CSP GENERAL FEATURES - Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations - 4,194,304 x 8 / 2,097,152 x 16 switchable - Sector structure - 8KB (4KW) x 8 and 64KB(32KW) x 63 - Sector Protection/Chip Unprotect - Provides sector group protect function to prevent program or erase operation in the protected sector group - Provides chip unprotect function to allow code changes - Provides temporary sector group unprotect function for code changes in previously protected sector groups - Secured Silicon Sector - Provides a 128-word OTP area for permanent, secure identification - Can be programmed and locked at factory or by customer - Latch-up protected to 250m A from -1V to VCC + 1V - Low VCC write inhibit is equal to or less than 1.5V - patible with JEDEC standard - Pin-out and software patible to single power supply Flash PERFORMANCE - High...