Datasheet4U Logo Datasheet4U.com

MX9691L - SINGLE CHIP SOLID STATE DISK CONTROLLER

Description

The Macronix's Solid State Disk controller MX9691L is a wide-range supply voltage(3.3Volt~5Volt) and fully integrated flash memory controller that provides all the control logic for PCMCIA/True IDE host and flash memory.

Features

  • ded ATA drive to indicate that the drive in slave mode has passed diagnostics. REG#/DACK# 95 I (CMOS) HCE1#/ CS1FX# 115 I (CMOS) HCE2#/ CS3FX# 114 I (CMOS) INPACK#/ DREQ 118 O (CMOS) SPKR/DASP# 93 I/.

📥 Download Datasheet

Datasheet Details

Part number MX9691L
Manufacturer Macronix
File Size 194.56 KB
Description SINGLE CHIP SOLID STATE DISK CONTROLLER
Datasheet download datasheet MX9691L Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX902-1D Explosion-Proof DTU MAXON
MX909A GMSK Modem Data Pump CML
MX91-FF-206U STEP MOTOR Superior Electric
MX91-FF-402U STEP MOTOR Superior Electric
MX91-FF-403U STEP MOTOR Superior Electric

Other Datasheets by Macronix

Part Number Description
MX9691A SINGLE CHIP SOLID STATE DISK CONTROLLER
MX93000 Special Codec
MX93000KC Special Codec
MX93002 PCM CODEC
MX93002FC PCM CODEC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MX9691L SINGLE CHIP SOLID STATE DISK CONTROLLER 1. FEATURE Host Interface • PCMCIA 2.1 and PC Card ATA standard compatible. - Memory mapped or I/O operation. • Compatible with all PC Card Services and Socket Service. • Fast ATA host-to-buffer burst transfer rates up to 20MB/sec. which support PIO mode 4(16.6MB/sec) and DMA mode 2(16.6MB/sec). • Automatic sensing of PCMCIA or True IDE host inter face. • Integrated PCMCIA attribute memory of 256 bytes (CIS) - CIS and Buffer RAM use same SRAM area to simplify internal bus design • PCMCIA card configuration register support. • Polarity control for Host reset signal. • PCMCIA twin card support. • PCMCIA based ATA address decode support. • Emulate the IBM task file for PC/AT. • Separate status for Host reset signal and Host program reset.
Published: |