Datasheet Details
| Part number | MT1102ET |
|---|---|
| Manufacturer | MagnTek |
| File Size | 1.22 MB |
| Description | Hall-Effect Magnetic Position Sensors |
| Datasheet | MT1102ET_MagnTek.pdf |
|
|
Overview: MT1102 Series CMOS, Uni-polar, Hall-Effect Magnetic Position.
| Part number | MT1102ET |
|---|---|
| Manufacturer | MagnTek |
| File Size | 1.22 MB |
| Description | Hall-Effect Magnetic Position Sensors |
| Datasheet | MT1102ET_MagnTek.pdf |
|
|
|
Flat TO-92 package, bulk packaging (1000pcs /bag) Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag) SOT-23 package, tape and reel packaging (3000pcs/bag) SOT-89B package, tape and reel packaging (1000pcs/bag) SOT-23(thin outline) package, tape and ree l packaging (3000pcs/bag) General Description The MT1102 family, produced with CMOS technology, The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltages of 3.5 to 24V, temperature pensation circuitry, small-signal amplifier, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output.
They are designed to respond to a single pole: North (AT) or South (A, BT and ET).
While the magnetic flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic flux density(B) is lower than release point (Brp), then turn off (High).
| Part Number | Description |
|---|---|
| MT1102 | Hall-Effect Magnetic Position Sensors |
| MT1102A | Hall-Effect Magnetic Position Sensors |
| MT1102A-T | Hall-Effect Magnetic Position Sensors |
| MT1102AT | Hall-Effect Magnetic Position Sensors |
| MT1102BT | Hall-Effect Magnetic Position Sensors |
| MT1103 | Hall-Effect Magnetic Position Sensors |
| MT1103A | Hall-Effect Magnetic Position Sensors |
| MT1103A-T | Hall-Effect Magnetic Position Sensors |
| MT1103AT | Hall-Effect Magnetic Position Sensors |
| MT1103BT | Hall-Effect Magnetic Position Sensors |