Datasheet4U Logo Datasheet4U.com

MT1103 Datasheet Hall-effect Magnetic Position Sensors

Manufacturer: MagnTek

Overview: MT1103 Series CMOS, Uni-polar, Hall-Effect Magnetic Position.

Datasheet Details

Part number MT1103
Manufacturer MagnTek
File Size 1.25 MB
Description Hall-Effect Magnetic Position Sensors
Datasheet MT1103-MagnTek.pdf

General Description

Flat TO-92 package, bulk packaging (1000pcs/bag) Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag) SOT-23 package, tape and reel packaging (3000pcs/bag) SOT-89B package, tape and reel packaging (1000pcs/bag) SOT-23(thin outline) package, tape and reel packaging (3000pcs/bag) General Description The MT1103 family, produced with CMOS technology, The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltages of 2.8 to 24V, temperature pensation circuitry, small-signal amplifier, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output.

They are designed to respond to a single pole: North (AT) or South (A, BT and ET).

While the magnetic flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic flux density(B) is lower than release point (Brp), then turn off (High).

Key Features

  • CMOS Technology Magnetic Type: Uni-polar Wide Operating Voltage Range: Supply Voltage 2.8~24V ℃ ℃Specified Operating Temperature Range: From.
  • 40 ~125 Magnetic Sensitivity Bop=120Gauss, Brp=90Gauss (typical) Lower Power Consumption Supply Current.

MT1103 Distributor