MN103E0600YD
MN103E0600YD is Microcomputers/Controllers manufactured by Matsushita.
Type Instruction Cache Data Cashe Package Minimum Instruction Execution Time Interrupts Timer Counter
MN103E0600YD (under development) 16 K-byte (4-way, set-associative) 16 K-byte (4-way, set-associative) MLGA239-C-1111 7.5 ns (at 1.8 V tolerance = ±5% , 133 MHz)
- XIRQ × 8
- NMI
- Timer × 14
- DMAC × 4
- WDT
- SIO × 6
- I 2C × 2
- Asynchronous bus error 8-bit timer × 4 (all down counters) Cascade connection possible (usable as a 16/24/32-bit timer) Timer output possible (Duty = 1:1) Internal clock source or external clock source selectable Selectable as a serial interface clock 16-bit timer × 7 (down counters) Cascade connection possible (usable as a 32-bit timer) Timer output possible (Duty = 1:1) Internal clock source or external clock source selectable Partially selectable as a serial interface clock 16-bit timer × 1 (up counter) Internal clock source or external clock source selectable Input capture function (rising edge, falling edges, or both selectable) PWM generating function (pare/capture register × 2 contained) Watchdog timer × 1
DMA Contoroller
Number of channels: 4 Transfer unit: 1/2/4/16 byte Maximum number of bytes transferred: 1Mbyte Start factor: External request, interrupt, software Transfer mode: 2-bus cycle transfer Transfer mode: Batch transfer, intermittent transfer Addressing mode: Source/destination each fixed, increment/decrement specification possible Increment/decrement automatically executed according to the transfer unit UART/synchronous (co-used) × 2-ch. UART (with CTS control) × 1-ch.
Serial Interface I/O Pins I/O
- mon use : 19
Memory Management Function On-chip Bus Controller
32-entry full-associative TLB loaded (instructions/data separated from each other) Address conversion by paging (page size: 1 K-byte. 4 K-byte, 128 K-byte, 4 M-byte variable) Concurrent access from three types of master devices to four types of slave devices possible
MAF00011BEM
System Bus Interface Memory Bus Interface...
