88LX2720 Datasheet | MaxLinear

Description This data sheet describes Max Linear’s 88LX2720 Wave-2 G.hn AFE. The 88LX2720 is a programmable, high-performance Wave-2 G.hn AFE for powerline munications with a single transmission channel and two reception channels to enable both SISO operation using one device and MIMO using two devices. In addition to the transmission and reception paths, the 88LX2720 contains a biasing circuit and a register block controlled from the digital interface. Applications - Powerline-to-Ethernet adapter. - Wi Fi extender. - Embedded G.hn modem. Features - Designed for powerline, baseband coaxial and phone line wiring. - Programmable transmission and reception gains. - Integrated filters. - Integrated line drivers. - Power down and standby mode. - Very low noise and distortion over the entire transmission and reception paths. - 28 pin QFN 4×4mm package. - Support for multiple AFEs operating in parallel with only one digital baseband (DBB) processor 88LX5152. Supported Standards - Code of Conduct on Energy Consumption of Broadband Equipment Version 5.0, European mission. - ITU-T G.9960: Unified high-speed wireline-based home networking transceivers - System architecture and physical layer specification (referenced as ITU-T G.9960). - ITU-T G.9961: Unified high-speed wire-line based home networking transceivers - Data link layer specification (referenced as ITU-T G.9961). - ITU-G.9962: Unified high-speed wire-line based home networking transceivers - Management specification (referenced as ITU-T G.9962). - ITU-T G.9963: Unified high-speed wireline-based home networking transceivers - Multiple input/multiple output specification (referenced as ITU-T G.9963). - ITU-T G.9964: Unified high-speed wire-line based home networking transceivers - Power spectral density specification (referenced as ITU-T G.9964). - .maxlinear.- 073-2720DSR03 88LX2720 Data Sheet Revision History Document No. Release Date 073-2720DSR03 July 14, 2020 056DSR02 July 18, 2017 Change Description Updated:...