MaxLinear GPY211C0VC
The GPY211 is a low power Ethernet PHY transceiver integrated circuit. It offers a cost-optimized solution that is well-suited for routers, switches, and home gateways. It performs the data transmission on an Ethernet twisted pair copper cable of category Cat5e or higher.| Part No. | GPY211C0VC |
|---|---|
| Datasheet | GPY211C0VC Download |
| Manufacturer |  MaxLinear |
| Description | Single Port 2.5G Ethernet PHY |
| Buy | Stock & Price |
FEATURES
This chapter provides an overview of the features supported by the GPY211: Communication Interfaces● The multiple speed, single-port Ethernet PHY interface to the twisted pair cable supports: – Ethernet modes and standards: 2.5GBASE-T (IEEE 802.3bz, NBASE-T), 1000BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3) and 10BASE-Te (IEEE 802.3) – Ethernet twisted pair copper cable of category CAT5 or higher – Low EMI voltage mode line driver with integrated termination resistors – Transformerless Ethernet for backplane applications – Auto-negotiation (ANEG) with extended next page support – Auto-MDIX and polarity correction – Auto-downspeed (ADS) – Energy-Efficient Ethernet (EEE) and power down mode – Wake-on-LAN (WoL) – Power-over-Ethernet (POE) – Precise time stamping, implementing standard IEEE 1588v2 – SPI interface supports Secure firmware upgrade of the flash memory
● The SGMII SerDes interface supports: – 1000BASE-X IEEE 802.3 Clause 36 and 37 [4] – Cisco Serial-GMII Specificatio...
