MaxLinear MxL86111C
The MxL86111 is a low power Ethernet PHY transceiver integrated circuit following the IEEE 802.3 [1] standard. It offers a cost-optimized solution that is well-suited for routers, switches, and home gateways. It performs data transmission on an Ethernet twisted pair copper cable of category CAT5e or higher.| Part No. | MxL86111C |
|---|---|
| Datasheet | MxL86111C Download |
| Manufacturer |  MaxLinear |
| Description | Single Port Gigabit Ethernet PHY |
| Buy | Stock & Price |
FEATURES
This section provides an overview of the features supported by the MxL86111. Communication Interfaces● The multiple speed, single-port Ethernet PHY interface to the twisted pair cable supports: – Ethernet modes and standards: 1000BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3) and 10BASE-Te (IEEE 802.3) – Ethernet twisted pair copper cable of category CAT5e or higher – Low EMI voltage mode line driver with integrated termination resistors – Transformerless Ethernet for backplane applications – Auto-Negotiation (ANEG) with extended next page support – Auto-MDIX and polarity correction – Auto-Downspeed (ADS) – Energy-Efficient Ethernet (EEE) and power down mode – Wake-on-LAN (WoL) – 10k byte jumbo frame support.
● RGMII Interface
● The SerDes interface supports: – 1000BASE-X IEEE 802.3 Clause 36 and 37 [1] – Cisco Serial-GMII Specification [2] operating at 1.25 Gbaud/s – Clock and Data Recovery (CDR) – 100 BASE-FX
● The management interface supports the communication between the S...
