MaxLinear MxL86282C
The MxL86282C device is a highly integrated, low power, non-blocking multi-port Ethernet Switch with two 10G Ethernet SerDes interfaces. It offers a cost-optimized solution well-suited for routers, switches, and home gateways. The MxL86282C has eight integrated Ethernet BASE-T PHYs which support four data rates: 2500, 1000, 100, and 10 Mbps.| Part No. | MxL86282C |
|---|---|
| Datasheet | MxL86282C Download |
| Manufacturer |  MaxLinear |
| Description | 10-Port Ethernet Switch |
| Buy | Stock & Price |
FEATURES
This section provides an overview of the features supported by the MxL86282C. Communication Interfaces● The eight Ethernet BASE-T interfaces support: – Ethernet modes and standards 2.5GBASE-T (IEEE 802.3, NBASE-T), 1000BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3), and 10BASE-Te (IEEE 802.3) – Ethernet twisted pair copper cable of category Cat5 or higher – Low EMI voltage mode line driver with integrated termination resistors – Transformerless Ethernet for backplane applications – Auto-Negotiation (ANEG) with extended next page support – Auto-MDIX and polarity correction – Auto-Downspeed (ADS) – 100BASE-TX EEE, 1000BASE-T EEE, 2.5GBASE-T EEE, and power down mode – Cable diagnostics: cable open/short detection and cable length estimation – Wake-on-LAN (WoL) – Jumbo frames of up to 10 kB
● Two Ethernet SerDes interfaces, where each interface supports: – 10G/5G/2.5G-USXGMII, SGMII+, SGMII, XFI/SFI, 10G-KR, 5G-KR
