SP3485 Datasheet 3.3v Low Power Half-duplex Rs-485 Transceiver

Manufacturer: MaxLinear

Overview: August 5, 2021 SP3485 3.3V Low Power Half-Duplex RS-485 Transceiver with 10Mbps Data.

Datasheet Details

Part number	SP3485
Manufacturer	MaxLinear
File Size	914.24 KB
Description	3.3V Low Power Half-Duplex RS-485 Transceiver
Datasheet	SP3485-MaxLinear.pdf

The SP3485 device is a 3.3V low power half-duplex transceiver that meets the specifications of the RS-485 and RS-422 serial protocols.

This device is pin-to-pin patible with the MaxLinear SP481, SP483 and SP485 devices as well as popular industry standards.

The SP3485 can meet the electrical specifications of the RS-485 and RS422 serial protocols up to 10Mbps under load.

RS-485 and RS-422 transceiver.
Operates from a single 3.3V supply.
Interoperable with 5.0V logic.
Driver/receiver enable.
-7V to +12V common-mode input voltage range.
Allows up to 32 transceivers on the serial bus.
Compatibility with industry standard 75176 pinout.
Driver output short-circuit protection Ordering Information - Back Page Block Diagram RO 1 RE 2 DE 3 DI 4 R 8 VCC 7B 6A D 5 GND SP3485 216DSR0.

Brand Logo	Part Number	Description	Manufacturer
	SP3485	+3.3V Low Power Half-Duplex RS-485 Transceiver	Exar
UMW	SP3485E	RS485/RS422 transceiver	UMW

Part Number	Description
SP3483	3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver
SP3490	3.3V Low Power Full-Duplex RS-485 Transceivers
SP3491	3.3V Low Power Full-Duplex RS-485 Transceivers
SP3494	3.3V Low Power RS-485/RS-422 Transceiver
SP3070E	RS-485/RS-422 Transceivers
SP3078E	RS-485/RS-422 Transceivers
SP3082E	Advanced-Failsafe RS-485 / RS-422 Transceivers
SP3083E	Advanced-Failsafe RS-485 / RS-422 Transceivers
SP3084E	Advanced-Failsafe RS-485 / RS-422 Transceivers
SP3085E	Advanced-Failsafe RS-485 / RS-422 Transceivers