Datasheet4U Logo Datasheet4U.com

SP6133 Datasheet Synchronous Buck Controller

Manufacturer: MaxLinear

Overview: SP6133 Synchronous Buck Controller VCC UVIN VIN BST.

General Description

The SP6133 is a synchronous step-down switching regulator controller optimized for high efficiency.

The part is designed to be especially attractive for single supply step down conversion from 5V to 24V.

The SP6133 is designed to drive a pair of external NFETs using a fixed 300 kHz frequency, PWM voltage mode architecture.

Key Features

  • 5V to 24V Input step down converter.
  • Up to 30A output capability.
  • Highly integrated design, minimal components GL.
  • UVLO Detects Both VCC and VIN.
  • Overcurrent circuit protection with auto-restart PGND.
  • Power Good Output, ENABLE Input GND.
  • Maximum Controllable Duty Cycle Ratio up to 92%.
  • Wide BW amp allows Type II or III compensation VFB.
  • Programmable Soft Start.
  • Fast Transient Response.
  • High Efficiency: Greater than 95% possible.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
Sipex Corporation Logo SP6133 Synchronous Buck Controller Sipex Corporation

More Datasheets from MaxLinear

Part Number Description
SP619 High Current Power Switch
SP6203 300mA Low Noise CMOS LDO Regulators
SP6205 500mA Low Noise CMOS LDO Regulators
SP6213 Micropower 100mA CMOS LDO Regulator
SP6214 Micropower 100mA CMOS LDO Regulator
SP6669 800mA 1.5MHz Synchronous Step-Down Converter
SP6669EB 800mA 1.5MHz Synchronous Step-Down Converter
SP6686 400mA Buck/Boost Charge Pump LED Driver
SP6699 30V Step Up White LED Driver

SP6133 Distributor